A wide range of pliers including round nosed, flat nosed, snipe, half-round, parallel and miscelaneous pliers.
| Lindstrom Flat Nose Pliers |  | |||
| High quality flat nose pliers providing large, smooth non-marring gripping surface and slim profile for ease of access. 120mm total length, 19mm jaw length. | ||||
£52.99 | ||||
| MTPEFC Flat Nose Pliers |  | |||
| Flat nose cross-section pliers used for general purpose work. Ideal for straightening fine wire and making sharp corners. 130mm total length, 22mm jaw length. | ||||
£23.99 | ||||
| Lindstrom Round Pliers |  | |||
| High quality round nose pliers tapering gently towards the tips and providing the capability to form a wide range of loop and bend sizes. 120mm total length, 16mm jaw length. | ||||
£43.99 | ||||
| MTPERC Round Nose Pliers |  | |||
| Round nose pliers for bending curves into metal. 130mm total length, 22mm jaw length. | ||||
£23.99 | ||||
| Half Round Pliers |  | |||
| D-shape cross-section pliers commonly used for ring bending. The inside curved edge curls the metal whilst the opposite flat edge holds the metal firm without marking the surface. 130mm total length, 22mm jaw length. | ||||
£31.99 | ||||
| Heavy Half Round Pliers |  | |||
| Heavy duty D-shape cross-section pliers commonly used for ring bending. The inside curved edge curls the metal whilst the opposite flat edge holds the metal firm without marking the surface. 130mm total length, 22mm jaw length. 165mm total length, 35mm jaw length. | ||||
£32.99 | ||||
| Lindstrom Long Snipe Nose Pliers |  | |||
| High quality smooth, snipe nose pliers providing good reach and a non-marring gripping surface with bevelled edges to allow bending of even soft materials with minimal deformation. 130mm total length, 32mm jaw length. | ||||
£40.99 | ||||
| Lindstrom Snipe Nose Pliers |  | |||
| High quality short snipe nose pliers providing non-marring fine tips for precision holding and positioning applications. Short nose eliminates jaw flex and loss of grip in heavier duty pulling, bending or twisting applications. 120mm total length, 20mm jaw length. | ||||
£39.99 | ||||
| Snipe Nose Pliers |  | |||
| Snipe nose pliers ideal for working in fine areas. 130mm total length, 22mm jaw length. | ||||
£53.99 | ||||
| Maun Parallel Flat Pliers |  | |||
| Flat nose cross-section parallel pliers used for general purpose work. Ideal for straightening fine wire and making sharp corners. The parallel jaw design grip evenly along their entire length making it easier to grip multiple strips of wire at the same time. *MJO denotes maximum jaw opening. Available in the following: 160mmx14mm - Smooth 140mmx11mm -Serrated 140mmx10mm - Smooth | ||||
£22.99 | ||||
| Maun Parallel Round Pliers |  | |||
| Round nose parallel pliers for bending curves into metal. The parallel jaw design grip evenly along their entire length making it easier to grip multiple strips of wire at the same time. 125mm total length, 30mm jaw length. Maximum jaw opening 15mm. | ||||
£29.99 | ||||
| Maun Parallel Snipe Pliers |  | |||
| Snipe nose parallel pliers ideal for working in fine areas. The parallel jaw design grip evenly along their entire length making it easier to grip multiple strips of wire at the same time. 125mm total length, 30mm jaw length. Maximum jaw opening 10mm. | ||||
£26.99 | ||||
| Claw Lifting Pliers |  | |||
| For lifting claws from set stones putting all the pressure on the metal. With grooved tips. | ||||
£25.99 | ||||
| Heavy Claw Lifting Pliers |  | |||
| Heavy duty pliers for lifting setting claws away from the stone. They have angled jaws for maximum control with the pressure focused on the claw not the stone. | ||||
£46.99 | ||||
| Ring Bending Tool |  | |||
| A very heavy duty tool to bend metal up to 6.0mm thick into a circular shape. 185mm total length. | ||||
£92.99 | ||||
| Ring Holding Pliers |  | |||
| For holding rings while polishing the inside surface. 150mm total length, 35mm jaw length. | ||||
£22.99 | ||||
